SafeWinch – Wheelchair Winch and Front Tie-Down

The SafeWinch wheelchair winch and front tie-down is a patented and innovative system that combines a wheelchair winch and front tie-down in one compact and efficient solution.

This system stands out for its ease of use and immediate operation: the user simply presses one of the two buttons, IN or OUT, to bring the wheelchair in or out. The system automatically manages motor synchronization, locking and unlocking, as well as strap tensioning.

SafeWinch – All-in-one winch and front tie-down integrates two independent motor units, automatically synchronized by the central control unit to ensure smooth and coordinated operation.

The built-in technology automatically manages :

motor synchronization ,

strap tensioning ,

system locking and unlocking .

No manual adjustment is required : the user remains focused on assistance, not on mechanics.

The SafeWinch complies with ISO 10542 for wheelchair tie-down and occupant restraint systems (WTORS). The system has been designed to simplify and secure wheelchair tie-down in adapted vehicles. This innovative solution reduces the effort required from the caregiver while ensuring reliable and automated strap tensioning.

Request a quote Download the brochure

SafeWinch Kit Contents

2 motor units (right and left)

1 central control unit

1 control panel

2 harnesses connecting the motors to the central unit

1 harness connecting the central unit to the control panel

1 large remote control

1 small remote control

Everyday Use

Entering the Vehicle

Position the wheelchair at the bottom of the ramp.

Press OUT to unwind the straps, then attach them to the wheelchair.

Press IN to start the ascent while guiding the movement until the wheelchair reaches almost its final position.

Secure the rear tie-down.

Press IN again until the straps are fully tensioned.

Fasten the occupant’s seatbelt.

For the rear tie-down, we recommend using manual straps adjusted to the correct length. Once the rear tie-down is secured, the SafeWinch takes over and automatically tensions the front straps. The LED flashes twice to confirm proper tensioning. When the rear door or tailgate is closed, the SafeWinch automatically deactivates and locks into its final position.

Exiting the Vehicle

Press the OUT button for a few seconds to slightly release the tension and make it easier to remove the hook from the rear tie-down.

Remove the rear straps, then continue lowering the wheelchair using the OUT button while manually guiding the movement.

Design & Maintenance

The SafeWinch features plug-and-play connections, designed to make quick component replacement easier in the event of a failure. Either motor unit or the central control unit can be replaced easily, without specialized tools.

Approvals & Compliance
The SafeWinch has been dynamically tested and complies with ISO 10542. .

During these tests, the following equipment supplied by our partner SBS (Safety Belt Solutions) was used:

adjustable rear tie-down straps

a 3-point seatbelt with height adjuster for the occupant

Customized Testing :
In partnership with Safety Belt Solution (SBS), we also offer customized ISO 10542 dynamic testing to validate installation compliance with:

the customer vehicle geometry

the selected tie-down system

The two SafeWinch motor units must be installed on the front anchorage points normally intended for electric retractors. These anchorage points must be tested and approved according to R14 by the vehicle converter or the lowered-floor kit manufacturer

System Installation :

Install the two SafeWinch motor units on the front anchorage points originally intended for electric retractors. These anchorage points must be tested and approved according to R14.

Remote Control Pairing :

Adding and pairing a new remote control is very simple:

Open the small hatch located on the central control unit.

Press the programming button (small button under the hatch).

Then press one of the buttons on the remote control to be paired.

The remote control is then stored by the system.